Characterization of octadecyltrichlorosilane self-assembled monolayers on silicon (100) surface
Both monolayers and multilayers were obtained from a dilute solution of n -octadecyltrichlorosilane [OTS, CH 3 (CH 2 ) 17 SiCl 3 ] on a SiO 2 /Si surface after a low pressure O 2 plasma treatment. A close-packed monolayer of good quality was formed on the SiO 2 /Si surface. The resulting self-assemb...
Gespeichert in:
Veröffentlicht in: | The Korean journal of chemical engineering 2009, 26(6), 123, pp.1778-1784 |
---|---|
Hauptverfasser: | , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Both monolayers and multilayers were obtained from a dilute solution of
n
-octadecyltrichlorosilane [OTS, CH
3
(CH
2
)
17
SiCl
3
] on a SiO
2
/Si surface after a low pressure O
2
plasma treatment. A close-packed monolayer of good quality was formed on the SiO
2
/Si surface. The resulting self-assembled layers were characterized by goniometry, atomic force microscopy (AFM), ellipsometry and Fourier transformed infrared attenuated total reflection (FTIR-ATR) spectroscopy. An examination of the time-dependent water contact angle measurements as a function of the OTS concentration revealed rapid monolayer formation at the initial stage. The contact angle measurements showed that the surface structure of the OTS monolayer was quite resistant to environmental changes as a result of the polymerization of OTS molecules and the formation of covalent bonds between the monolayer and substrate surface. The surface was covered with islands (observed by AFM) that were in-filled to produce in a smooth surface. The FRIR-ATR spectra showed symmetric (
ν
s(CH
2
)) and asymmetric (
ν
as(CH
2
)) components perpendicular to the surface. |
---|---|
ISSN: | 0256-1115 1975-7220 |
DOI: | 10.1007/s11814-009-0249-9 |