접착이음의 강도평가에 대한 해석
The objects of this research are to establish the criteria of peel occurrence considering the shape of bond terminus and to compare the strength properties of adhesive joint of different three type such as butt joint, T-shape, and single lap joints. The criteria of peel occurrence at the bond termin...
Gespeichert in:
Veröffentlicht in: | 한국생산제조학회지 2005, 14(5), , pp.62-73 |
---|---|
1. Verfasser: | |
Format: | Artikel |
Sprache: | kor |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The objects of this research are to establish the criteria of peel occurrence considering the shape of bond terminus and to compare the strength properties of adhesive joint of different three type such as butt joint, T-shape, and single lap joints. The criteria of peel occurrence at the bond terminus was suggested. Peel loads of three type adhesive joint (butt joint, T-shape specimen, single lap joint) were determined from tensile tests. Principal stress distributions of these joints were determined from finite element method analysis. Then, peel occurrence was estimated with stress singularity factor(Kprin) when the terminus shape was square, with average principal stress when the terminus shape was rounded. The conclusions are summarized as follows; (1) In the non-filleted model(e.g., butt joint, T-shape specimen), principal stress shows singularity at the bond terminus, intensity of stress(principal stress) singularity (Kprin) can use as the criteria of peel occurrence at the bond terminus. (2) In the filleted model(e.g., single lap joint), principal stress has not affected singularity at the bond terminus. Average principal stress(Kav)can use as the criteria of peel occurrence at the bond terminus. KCI Citation Count: 5 |
---|---|
ISSN: | 2508-5093 2508-5107 |