Effects of deposition parameters on the structure and mechanical properties of high-entropy alloy nitride films

High-entropy alloy (AlCrNbSiTiV)N nitride films are prepared using direct current (dc) reactive magnetron sputtering, with an equiatomic AlCrNbSiTiV alloy target. Experiments using the grey-Taguchi method are conducted to determine the effect of deposition parameters (dc power, substrate temperature, N2/(N2+Ar) flow rate and substrate bias) on the microstructure, mechanical and tribological properties. Orthogonal array (L9 34), signal-to-noise ratio and analysis of variance are used to analyze the effect of the deposition parameters. The coated films are examined using scanning electron microscopy, an atomic force microscope, transmission electron microscopy (TEM), a tribometer and a nanoindenter. The TEM patterns confirm that the (AlCrNbSiTiV)N nitride films have a simple face-center-cubic structure. The experimental results show that a (AlCrNbSiTiV)N film coating significantly improves the mechanical properties. In the confirmation runs, using grey relational analysis, the improvement in friction coefficient is 32.5%, in corrosion current is 28.6%, in hardness H is 29.4%, in elastic modulus E is −18.3%, in H/E is 57.1 and in H3/E2 is 225.0%. The samples with (AlCrNbSiTiV)N film coating are classified as HF1 and exhibit good adhesive strength. Bright-field plan view TEM images and their corresponding SAD patterns for the (AlCrNbSiTiV)N film coatings, show that there is a simple FCC crystal phase. [Display omitted] •ANOVA results for (AlCrNbSiTiV)N coated, substrate bias has a significant affect.•These coated films are analyzed using SEM, AFM, TEM.•Multiple performance for these films coated can be improved using grey-Taguchi method.•(AlCrNbSiTiV)N films coated be classified as HF1, shows good adhesion strength.