도정효율 증진을 위한 벼 품종특성별 현미선별체 적정크기

On the purpose to improve the milling efficiency as well as head-rice percentage after milling, an experiment to improve the removal ability of immature kernels in the immature brown rice separator (IBRS) was performed focused on varietal characteristics. The removal ability of immature grains by the IBRS was absolutely depending on kernel thickness of brown rice. The kernel thickness of the tested rice varieties distributed from 1.79 mm in Nonganbyeo to 2.16 mm in Daeribbyeo 1. Although there were some variation among rice varieties, it was roughly suggested that the suitable sieve-slit widths for good separation of the immature kernels were 1.9 mm for the varieties thicker than 2.08 mm in thickness, 1.8 mm for the varieties with 2.00-2.08 mm thickness, 1.7 mm for the varieties with 1.90-2.00 mm thickness, and 1.60-1.65 mm for the varieties thinner than 1.7 mm. It was found out that the higher the proportions of immature kernels in brown rice, the more conspicuous the improvement of milling efficiency as well as head rice rates by their removals. With increasing the sieve slit-widths beyond an optimum range, the losses of mature grains increased sharply. For effective separation of immature kernels, it was suggested that the optimum sieve-slit width should be set up depending on both of the kernel thickness and the critical loss limit of mature kernel.