Microstructure Evolution and Pull Strength in Sn-8Zn-3Bi Solder and Eutectic Sn-37Pb Solder for CSP Joints
The microstructure of low temperature Sn-8Zn-3Bi and eutectic Sn-37Pb solders and the pull strength of these solders with Au/Ni electrolytic-plated Cu substrate under thermal aging conditions were investigated. The samples were aged isothermally at 100 C and 150 C for 3600 h. Sn-8Zn-3Bi had higher p...
Gespeichert in:
Veröffentlicht in: | Journal of the Korean Physical Society 2005, 47(3), , pp.459-463 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | kor |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The microstructure of low temperature Sn-8Zn-3Bi and eutectic Sn-37Pb solders and the pull
strength of these solders with Au/Ni electrolytic-plated Cu substrate under thermal aging conditions
were investigated. The samples were aged isothermally at 100 C and 150 C for 3600 h. Sn-8Zn-3Bi
had higher pull strength than eutectic Sn-37Pb. The pull strength decreased with increasing aging
times and was independent of the temperature. The microstructure of as-reflowed low temperature
Sn-8Zn-3Bi solder mainly consists of the Sn matrix scattered with Zn-rich phase. After aging at
150 C for 600 h, Zn reacted with Au and was then transformed to the AuZn compound. With
aging, Ni5Zn21 compounds were formed at the Ni layer. Finally, Ni5Zn21 phase, divided into three
layers, was formed with column-shaped grains, and the thicknesses of layers were changed. In the
eutectic Sn-37Pb solder, irregular-shaped Pb-rich phase was embedded in the Sn matrix. Ni3Sn4
compounds were observed at the interface between the solder and Ni substrate.? KCI Citation Count: 0 |
---|---|
ISSN: | 0374-4884 1976-8524 |