Fabrication of a Normoxic Polymer Gel Dosimeter and its Dose Distribution Characteristics

This study evaluated the performance of tissue equivalent polymer gel dosimetry as a tool for 3-dimensional dose quality assurance to using Magnetic Resonance Imaging (MRI) measure the dose characteristics of therapeutic radiation using and applying it to intensity modulated radiation therapy (IMRT). The polymer gel under normoxic conditions was synthesized using Gelatin, methyacrylic acid (MAA), hydroquinone (HQ) and tetrakis hydroxymethyl phosphonium chloride (THPC), and a polymer gel dosimeter was fabricated by placing the gel into each phantom appropriate for experimental use. The dose reaction experiment employed ^(60)Co gamma-rays and a 6-MV photon beam with a dose range of 0 ∼ 14 Gy. The dose characteristics of the polymer gel were compared with those of an ion chamber, Gafchromic EBT2 film, by using MRI. The linear correlations coefficient for the polymer gel, the ion chamber and the film were r^2 = 0.970, r^2 = 0.999, and r^2 = 0.972, respectively. The percentage depth doses at a depth of 50 mm were 85.8% and 84.6% for the polymer gel and the ion chamber, respectively, giving a difference of 1.2%. On the other hand, the percentage depth dose at the depth of 100 mm was 66.2% and 63.7% for the polymer gel and the ion chamber, respectively, indicating a 2.5% gap. The flatness and the symmetry of the gel dosimeter on the cross plane were 3.80% and 3.58%, respectively. The gel dosimeter was applied to an IMRT. The doses measured in the 100% dose domain of the therapeutic plan was 96.2%, 103.0%, and 100% for the axial, sagittal and coronal planes, respectively, highlighting the applicability of the gel dosimeter as a 3-dimensional dosimeter. KCI Citation Count: 8