Comparetive study for adsorptive removal of Cs, Sr and Co ions from aqueous solution by acid-activated clay

Raw white clay was acidified with H2SO4 (2 M) and then activated in a furnace for 2 h at 150°C. The resulting acid-activated clay product was used as an adsorbent for the removal of radioactive substances such as Cs+, Sr2+ and Co2+ ions in aqueous solution. The specific surface area and the pore vol...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Environmental engineering research 2024, 29(5), , pp.1-9
Hauptverfasser: Daeik Kim, Sun-Jin Hwang, Su Ho Bae, Keon Sang Ryoo
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Raw white clay was acidified with H2SO4 (2 M) and then activated in a furnace for 2 h at 150°C. The resulting acid-activated clay product was used as an adsorbent for the removal of radioactive substances such as Cs+, Sr2+ and Co2+ ions in aqueous solution. The specific surface area and the pore volume of acid-activated clay were three times higher compared to raw white clay. At 100 mg L− of initial concentration and 1.0 g of dosage, removal efficiencies of Cs+, Sr2+ and Co2+ ions showed 60.0%, 27.3%, and 88.1%, respectively. It was found that the Langmuir isotherm was described well to the adsorption behavior of Cs+, Sr2+ and Co2+ ions on acid-activated clay rather than Freundlich isotherm. The Langmuir isotherm constant (Q) for Cs+, Sr2+ and Co2+ ions was found to be 8.81, 3.78 and 10.20 mg g−1, respectively. Compared to the pseudo-first-order kinetic model, the pseudo-second-order kinetic model was more suitable for adsorption of Cs+, Sr2+ and Co2+ ions in water/acid-activated clay medium owing to the higher correlation coefficient (R2) and the more proximity value of the experimental value qe,exp and the calculated value qe,cal. KCI Citation Count: 0
ISSN:1226-1025
2005-968X
DOI:10.4491/eer.2024.039