Field measurements of overlap reductions for two reinforced fabric-encased geosynthetic clay liners (GCLs)

Two geosynthetic clay liners (GCLs) reported to have experienced significant shrinkage at other locations are examined on both a 3H:1V south-facing slope and a relatively flat base on a silty sand. The GCLs were overlapped by 300 mm with 400 g/m of supplemental bentonite and covered by a black 1.5 mm high-density polyethylene (HDPE) geomembrane to form a composite liner that was left exposed in a full-scale field test embankment for a period of almost 5 years. It is shown that despite the relatively uniform exposure conditions, shrinkage is highly variable with a maximum shrinkage of GCL A being 165 mm on the slope and 415 mm on the base while GCL B shrunk by up to 75 mm on the side slope and only up to 25 mm on the base. The dominant role played by variable overlap stick and heterogeneity to the locations where the overlaps are re-wetted are discussed. Based on this study of shrinkage and a related study of downslope erosion at the same site, it is concluded that neither GCLs A nor B should be left in exposed composite liners when they can be subjected to thermal cycles that can lead to hydration and dehydration of the GCL.