Electrodynamic Thrust Performance for Space Solar Satellite Applications

The use of spinning tethers to transfer payloads from low earth orbit (LEO) to geosynchronous earth orbit (GEO) has previously been considered for payload masses up to 4000 kg (4 MT). The construction of the solar power station requires a transfer of 22,568 MT per year from LEO to GEO. This is envis...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
1. Verfasser: Estes, Robert D.
Format: Report
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The use of spinning tethers to transfer payloads from low earth orbit (LEO) to geosynchronous earth orbit (GEO) has previously been considered for payload masses up to 4000 kg (4 MT). The construction of the solar power station requires a transfer of 22,568 MT per year from LEO to GEO. This is envisioned to be carried out in payload units of 20 MT or 40 MT, which implies a frequency of 1188 or 594 flights per year, respectively. We could say from the outset that the use of spinning tethers for such large payloads at such high launch frequencies does not appear promising. This is inherent in the principles of spinning tether transfer, which we will briefly sketch below. Somewhat different scenarios are possible, but the basic physics remains the same. We consider only a single stage from LEO to GTO tether system, since the complexity involved in phasing the launches, docking, and spinups for a two-stage system for so many payloads rules out a two-stage system, in our opinion. The payload must first be launched to LEO, where it docks with the tether launch platform and is connected to the tether. The tether (tens of kilometers long) is then deployed with the payload upward. In order to give the payload the velocity necessary to launch it into a geosynchronous transfer orbit (GTO), i.e., to impart the required Av, the tethered system must be spun up about the center of mass of the tether-platform-payload system. The two end masses (platform and payload) are driven to rotate about the center of mass of the tethered system. Both the final rotational velocity and the phasing of the tether spin have to be controlled so that payload is in the vertically up position at the perigee of the LEO and with the velocity required to achieve the GTO when it is released at that point. Upon release, the payload then goes into GTO, where it again requires an acceleration to reach GEO (circularization of the orbit). The platform goes into a lower orbit, from which it must be raised in order to be at the proper LEO for docking with another payload. For this scheme to make sense at all, the platform must be envisioned as having a solar powered electrical thrust system to regain LEO and to spin up the tethered system. Similarly, solar powered electrical propulsion would be used to circularize the orbit to GEO.