SRB TPS closeout materials characterization

The recession characteristics of the materials used to closeout the Thermal Protection System (TPS) on the Space Shuttle Solid Rocket Booster (SRB) were assessed. Two candidate closeout materials namely, K5NA and MTA2 is the Marshall Trowelable Ablator. Test panels of each of these two materials were subjected to aerodynamic heat and shear in the NASA Hot Gas Facility. Pretest and Post-test measurements were taken and the rate of recession (R) thus determined was correlated with the heating rate. A least squares curve fit of the data together with another least squares 95% confidence level fit, was performed. The characteristics of the two materials when compared showed that both materials performed equally well at the higher heating rates (10 q 30 Btu/sq ft/sec) but MTA2 was slightly better, not receding as fast, at the lower q values. The comparison of the R versus q curves for K5NA and MTA2 with that of primary TPS P-50 cork on the SRB Aft Skirt was good.