Influence of Cathode Potential on Ti Electrodeposition in Molten Fluoride
The electrolysis condition of Ti electrodeposition in CaF2-MgF2 with CaO and TiO2 has been studied at 1573K. It was shown by cyclic voltammetry that cathodic current increased below 0.8V (vs. Mg/Mg2+) with CaO and TiO2 addition and that three reduction steps of Ti was suggested. Based on results of...
Gespeichert in:
Veröffentlicht in: | ECS transactions 2016-08, Vol.75 (15), p.199-206 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The electrolysis condition of Ti electrodeposition in CaF2-MgF2 with CaO and TiO2 has been studied at 1573K. It was shown by cyclic voltammetry that cathodic current increased below 0.8V (vs. Mg/Mg2+) with CaO and TiO2 addition and that three reduction steps of Ti was suggested. Based on results of cyclic voltammetry, potentio-staic electrolysis was carried out between 0.2V and 0.7V. The particles containing Ti were obtained by potentio-static electrolysis. Particles containing Ti in electrodeposits were found by SEM-EDX. Ti oxide particles were detected by the electrolysis above 0.5V, while Ti metal particles did by the electrolysis below 0.4V. This result indicates that Ti metal can be electrodeposited below 0.4V (vs. Mg/Mg2+). |
---|---|
ISSN: | 1938-5862 1938-6737 |
DOI: | 10.1149/07515.0199ecst |