Thermally/mechanically robust anodic aluminum oxide (AAO) microheater platform for low power chemoresistive gas sensor

The semiconductor metal oxide gas sensors are getting high attention owing to their high sensitivities and fast responses. They require high temperature for the reaction with target gases, and suspended silicon membrane microheaters are typically used to reduce the heating power consumption. However...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of micromechanics and microengineering 2023-08, Vol.33 (8), p.85011
Hauptverfasser: Lee, Byeongju, Cho, Incheol, Kang, Mingu, Yang, Daejong, Park, Inkyu
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The semiconductor metal oxide gas sensors are getting high attention owing to their high sensitivities and fast responses. They require high temperature for the reaction with target gases, and suspended silicon membrane microheaters are typically used to reduce the heating power consumption. However, they have low durability for long-term uses, and high probability of fracture by thermal stress or mechanical impact. In this study, as an alternative to the silicon membrane microheater, anodic aluminum oxide (AAO)-based microheater platform gas sensor was fabricated for low power consumption and high thermal/mechanical stabilities. Nanoscale air gaps of the AAO substrate reduce the heat loss transferred to the substrate. Therefore, AAO-based microheater platforms do not require suspended structures sustained by very thin bridges, which dramatically enhances thermal/mechanical stabilities. The temperature of fabricated microheater platform reached to 250 °C by a heating power of 27.4 mW. The excellent thermal/mechanical stabilities of the AAO-based microheater platforms were verified by cyclic on-off and mechanical shock test. The pulsed heating operation was adopted, and it reduced the heating power consumption to 9 mW. The fabricated AAO-based gas sensors showed much higher responses to NO 2 gas compared to the SiO 2 membrane-based gas sensors.
ISSN:0960-1317
1361-6439
DOI:10.1088/1361-6439/ace05e