A Stator With Offset Segments and a Double Stator Design for the Reduction of Torque Ripple of a Switched Reluctance Motor

The torque ripple of a switched reluctance motor (SRM) should be taken into account, as it can have negative effects on a connected gearbox and/or load. In this paper a concept and two realization methods for the reduction of the torque ripple are presented. An optimized alignment of the active elements of the stator leads to a reduction of this torque ripple. The first method proposed here is a four-fold segmented motor, which can reduce the torque ripple by 37.3 %. This can be achieved by segmentation in combination with a clever arrangement of active elements. However, this increases the number of necessary inverters, which increases redundancy and therefore leads to more security. A second method of achieving an equal reduction can be obtained by using a "double stator" motor. In this configuration both stators can be powered together. With this concept, the number of converters is halved compared to the first mentioned solution. This saves electronic components and thus reduces the effort. All results referred to in this article are obtained by simulation, or measured on a prototype.