Integrated Quasi-Circulator With RF Leakage Cancellation for Full-Duplex Wireless Transceivers

An integrated reconfigurable CMOS quasi-circulator operating at 2.4 GHz is presented. A passive structure delivers transmit power amplifier (PA) output signal to the differential low-noise amplifier (LNA) input as a common-mode signal and simultaneously delivers received signal as a differential-mode signal at the LNA input. The leakage of the PA output signal at the LNA input is reduced in two steps. First, the use of a reconfigurable impedance matching circuit, instead of a fixed 50- \Omega resistance reduces the leakage by compensating the antenna impedance mismatch, and improves transmitter-receiver isolation. Second, a reconfigurable summing stage adds amplitude and phase adjusted PA output signal to LNA output to cancel the residual PA output leakage. Measurement results show that the receiver achieves a reduction of 90 dB for a single tone and more than 50 dB for a QPSK modulated 40-MHz bandwidth transmit signal. The receiver gain is more than 10 dB and the noise figure in the receiver path is 4.5 dB. The reconfigurable quasi-circulator along with the receiver LNA is designed and fabricated on a 130-nm CMOS technology. The cancellation circuitry occupies 0.27 mm 2 and consumes 30-mW quiescent power, while the total active area of the chip is 1 mm 2 , and it consumes 65-mW power.