Effect of Shunt Capacitances on Performance of Current-Mode Class-DE Power Amplifier at Any Active Time

In this paper, a current-mode Class-DE (CMCDE) power amplifier is presented. The CMCDE with linear shunt capacitance under zero-current switching (ZCS) and zero current-derivative switching (ZCDS) conditions at any active time is analyzed, simulated, and fabricated. An analytical theory along with t...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on power electronics 2018-08, Vol.33 (8), p.7038-7045
Hauptverfasser: Sheikhi, Akram, Abdipour, Abdolali, Grebennikov, Andrei, Hemesi, Hossein
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In this paper, a current-mode Class-DE (CMCDE) power amplifier is presented. The CMCDE with linear shunt capacitance under zero-current switching (ZCS) and zero current-derivative switching (ZCDS) conditions at any active time is analyzed, simulated, and fabricated. An analytical theory along with the design simulation and verification by experimental results at active time \tau _{d}= \pi / 2 are given. It was shown that the peak switch voltage can be adjusted with active time \tau _{d}. The proposed amplifier offers several desirable features, such as simple structure and possibility to include the parasitic inductance and shunt capacitance of the mosfet into a load network, so that ZCS condition is maintained. The results show that the switch voltage and current obtained in CMCDE amplifier are inversed in comparison to the voltage-mode Class-DE (VMCDE) amplifier by using a simple output matching network and series inductance. Also, we could control the harmonics in one resonator in comparison to multiple resonators used in some high-efficiency power amplifiers. The measured maximum drain efficiency of 88% and power gain of 22 dB at 42-dBm output power was obtained at 4 MHz for CMCDE amplifier at active time \tau _{d}= \pi / 2.
ISSN:0885-8993
1941-0107
DOI:10.1109/TPEL.2017.2764424