Influences of Nitrogen Doping on the Electrical Characteristics of Indium-Zinc-Oxide Thin Film Transistors

Thin film transistors (TFTs) with nitrogen doped amorphous indium-zinc-oxide (a-IZO:N) as the channel layer were prepared by rf magnetron sputtering with an argon, oxygen, and nitrogen gas mixture at room temperature. XRD measurements confirm the amorphous structure of a-IZO:N thin film and AFM veri...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on device and materials reliability 2016-12, Vol.16 (4), p.642-646
Hauptverfasser: Yanbing Han, Hai Yan, Yun-Chu Tsai, Yan Li, Qun Zhang, Shieh, Han-Ping D.
Format: Magazinearticle
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Thin film transistors (TFTs) with nitrogen doped amorphous indium-zinc-oxide (a-IZO:N) as the channel layer were prepared by rf magnetron sputtering with an argon, oxygen, and nitrogen gas mixture at room temperature. XRD measurements confirm the amorphous structure of a-IZO:N thin film and AFM verifies its uniformity. Transmittance curves show that nitrogen doping in a-IZO films can narrow the optical band gap and suppress oxygen vacancies, which is also proved by XPS. When the nitrogen flow rate is 4 SCCM, a-IZO TFTs possess optimized the characteristics, with saturation mobility 24.67 cm 2 V -1 s -1 , subthreshold swing 0.41 V/decade, on/off ratio 1.7 × 10 9 , and threshold voltage -14.46 V. Threshold voltages shift from -22.76 to -9.59 V as the nitrogen flow rate raises from 0 to 6.5 SCCM. The positive gate bias stability and negative bias illumination stability of a-IZO:N TFT are also improved with the nitrogen flow rate of 4 and 2.5 SCCM, respectively.
ISSN:1530-4388
1558-2574
DOI:10.1109/TDMR.2016.2617336