Comment on "Proposal for Measurement Method of Transfer Impedance of Current Probe"

Comment on "Proposal for Measurement Method of Transfer Impedance of Current Probe"

A previous paper mentioned that the international standard ISO 11452-4:2005 has given a requirement for the calibration fixture of current probe, i.e., the voltage standing wave ratio (VSWR) of the calibration fixture should be less than 1.2. Here is a comment about this.

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on electromagnetic compatibility 2015-06, Vol.57 (3), p.611-611
Hauptverfasser: Yao, Lijun, Ma, Weiyu
Format: Artikel
Sprache:eng
Schlagworte:
Calibration
Calibration fixture
calibration jig
current injection probe
Current measurement
current probe
ISO 11452-4
ISO standards
Military standards
Probes
voltage standing wave ratio (VSWR)
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:A previous paper mentioned that the international standard ISO 11452-4:2005 has given a requirement for the calibration fixture of current probe, i.e., the voltage standing wave ratio (VSWR) of the calibration fixture should be less than 1.2. Here is a comment about this.
ISSN:0018-9375
1558-187X
DOI:10.1109/TEMC.2015.2405612