Modeling of motor bearing currents in PWM inverter drives

PWM inverters have recently been found to be a major cause of motor bearing failures in inverter-motor drive systems. Specifically, all inverters generate common mode voltages relative to the earth ground. The voltages provide coupling or bearing currents through motor parasitic capacitances to the...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Shaotang Chen, Lipo, T.A., Fitzgerald, D.
Format: Tagungsbericht
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:PWM inverters have recently been found to be a major cause of motor bearing failures in inverter-motor drive systems. Specifically, all inverters generate common mode voltages relative to the earth ground. The voltages provide coupling or bearing currents through motor parasitic capacitances to the rotor iron and then back from the bearings to the grounded stator case. In this paper, a model for bearing currents caused by PWM inverters is proposed. The model is based on transmission line theory which uses an equivalent lumped parameter /spl pi/-network to describe the parasitic coupling phenomenon. The model parameters are then identified by matching the calculated model outputs with those of experimental measurement. The validation of the method is demonstrated by the fact that the model can reproduce all the experimental results obtained on a test motor. An application of this method also gives a motor grounding current model. As the conducted EMI in drive systems is related to the grounding currents, the grounding current model can be used for the analysis of conducted EMI in motor-drive systems.
ISSN:0197-2618
2576-702X
DOI:10.1109/IAS.1995.530326