6-18 GHz Edge Mode Isolator

6-18 GHz Edge Mode Isolator

A stripline geometry with high permeability pole pieces in contact with the upper and lower ground planes minimized the magnetic internal field non-uniformity that can degrade performance at low frequencies. A commercially available ferrite with 4πM=3440 gauss gave optimum isolator performance. YIG...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Adam, J.D., Stitzer, S.N., Gaglione, N.S.
Format: Tagungsbericht
Sprache:eng
Schlagworte:
Dielectric materials
edge-mode
Ferrite
Ferrites
Frequency
Gaussian processes
isolator
Isolators
Magnetic materials
Magnetostatic waves
microwave
Permanent magnets
Soft magnetic materials
Stripline
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:A stripline geometry with high permeability pole pieces in contact with the upper and lower ground planes minimized the magnetic internal field non-uniformity that can degrade performance at low frequencies. A commercially available ferrite with 4πM=3440 gauss gave optimum isolator performance. YIG sections at the input and output with 4πM=1780 gauss minimized low frequency loss due to excitation of magnetostatic waves. The calculated S 12 was ~ldB from 4GHz to 20GHz with S 21 exceeding -20dB from 6GHz to 17GHz. Measured S 21 , was >-3dB from 7GHz to 19GHz. S 12 , was
ISSN:0149-645X
2576-7216
DOI:10.1109/MWSYM.2007.380013