Charge trapping and annealing in high-/spl kappa/ gate dielectrics

We examine the radiation response, annealing characteristics, and long-term reliability of capacitors with Al gates and Al/sub 2/O/sub 3/-SiO/sub x/N/sub y/ gate dielectrics stacks which received a forming gas anneal (FGA) or an O/sub 2/ and FG anneal after high-/spl kappa/ deposition. By comparison...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on nuclear science 2004-12, Vol.51 (6), p.3143-3149
Hauptverfasser: Felix, J.A., Shaneyfelt, M.R., Fleetwood, D.M., Schwank, J.R., Dodd, P.E., Gusev, E.P., Fleming, R.M., D'Emic, C.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:We examine the radiation response, annealing characteristics, and long-term reliability of capacitors with Al gates and Al/sub 2/O/sub 3/-SiO/sub x/N/sub y/ gate dielectrics stacks which received a forming gas anneal (FGA) or an O/sub 2/ and FG anneal after high-/spl kappa/ deposition. By comparison to a theoretical capacitance-voltage (CV) curve, the FG annealed devices are found to have a large preirradiation interface trapped charge density of /spl sim/7/spl times/10/sup 11/ cm/sup -2/, whereas devices annealed in O/sub 2/ and FG show a large density (/spl sim/9/spl times/10/sup 11/ cm/sup -2/) of negative bulk charge. The midgap voltage shift (/spl Delta/V/sub mg/) increases monotonically with dose for both sets of devices, but the O/sub 2/ annealed devices exhibit 50% less trapping at a total dose of 2 Mrad(SiO/sub 2/). The radiation-induced voltage shifts are found to recover during long duration biased anneals as a result of tunneling and thermal annealing. For short times and large biases, the annealing response is found to be dominated by tunneling. After 1,000 s of annealing, there is a 50% reduction in /spl Delta/V/sub mg/ for devices annealed at 2.0 MV/cm and a 7.5% recovery for devices annealed at 1.0 MV/cm. For longer times, the annealing response of these devices is dominated by thermal annealing. Accelerated life testing shows these devices have a broad failure distribution with a large population of extrinsic failures. Extrapolation of the reliability data suggests these particular devices would have to be operated at an electric field less than /spl sim/2.5 MV/cm to achieve a ten-year operational lifetime. Improved reliability is, therefore, required before insertion into a manufacturing environment.
ISSN:0018-9499
1558-1578
DOI:10.1109/TNS.2004.839204