VHF single crystal silicon capacitive elliptic bulk-mode disk resonators-part II: implementation and characterization

This work, the second of two parts, reports on the implementation and characterization of high-quality factor (Q) side-supported single crystal silicon (SCS) disk resonators. The resonators are fabricated on SOI substrates using a HARPSS-based fabrication process and are 3 to 18 /spl mu/m thick. They consist of a single crystal silicon resonant disk structure and trench-refilled polysilicon drive and sense electrodes. The fabricated resonators have self-aligned, ultra-narrow capacitive gaps in the order of 100 nm. Quality factors of up to 46 000 in 100 mTorr vacuum and 26000 at atmospheric pressure are exhibited by 18 /spl mu/m thick SCS disk resonators of 30 /spl mu/m in diameter, operating in their elliptical bulk-mode at /spl sim/150 MHz. Motional resistance as low as 43.3 k/spl Omega/ was measured for an 18-/spl mu/m-thick resonator with 160 nm capacitive gaps at 149.3 MHz. The measured electrostatic frequency tuning of a 3-/spl mu/m-thick device with 120 nm capacitive gaps shows a tuning slope of -2.6 ppm/V. The temperature coefficient of frequency for this resonator is also measured to be -26 ppm//spl deg/C in the temperature range from 20 to 150/spl deg/C. The measurement results coincide with the electromechanical modeling presented in Part I.