Three-dimensional numerical simulation of flow in trapezoidal cutthroat flumes based on FLOW-3D
To solve the common problem of flumes flow-measurement accuracy without sacrificing water head, a new type of trapezoidal cutthroat flume to measure the discharge in terminal trapezoidal channels is presented. Using the computational fluid dynamic method, three-dimensional flow fields in trapezoidal...
Gespeichert in:
Veröffentlicht in: | Frontiers of Agricultural Science and Engineering 2018-05, Vol.5 (2), p.168-176 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | To solve the common problem of flumes flow-measurement accuracy without sacrificing water head, a new type of trapezoidal cutthroat flume to measure the discharge in terminal trapezoidal channels is presented. Using the computational fluid dynamic method, three-dimensional flow fields in trapezoidal cutthroat flumes were simulated using the RNG k- three-dimensional turbulence model along with the TruVOF technique. Simulations were performed for 12 working conditions, with discharges up to 0.075 m 3·s − 1 to determine hydraulic performance. Experimental data for the trapezoidal cutthroat flume in terminal trapezoidal channel were also obtained to validate the simulation results. Velocity distribution of the flume obtained from simulation analyses were compared with observed results based on time-averaged flow field and comparison yielded a solid agreement between results from the two methods, with relative error below 10%. The results indicated that the Froude number and the longitudinal average velocity increased along the convergence section and decreased in the divergent section. In the upper throat, the Froude number was less than 0.5, which meets the water measurement requirement, and the critical flow appeared near the throat section. The maximum water head loss of the trapezoidal cutthroat flume was less than 9% of the total head, compared to the rectangular cutthroat flume, and head loss of trapezoidal cutthroat flume was significantly less. Regression models developed for upstream depth versus discharge under different working conditions were satisfactory, with a relative error of less than 2.06%, which meets the common requirements of flow measurement in irrigation areas. It was concluded that trapezoidal cutthroat flumes can improve flow-measurement accuracy without sacrificing water head. |
---|---|
ISSN: | 2095-7505 2095-977X |
DOI: | 10.15302/J-FASE-2018217 |