Homoepitaxial growth of device-grade GaAs using low-pressure remote plasma CVD

We have achieved the growth of high-quality, homoepitaxial 100 GaAs thin films at 0.5 mbar and 500 °C using a Remote Plasma Chemical Vapor Deposition (RP-CVD) reactor. With this process, we demonstrate a film growth rate up to 3 μm/h, comparable to the conventional MOCVD technique. The resulting films exhibit structural characteristics close to those of commercial GaAs wafers, with excellent crystalline quality as confirmed by SAED patterns and XRD rocking-curve measurements for the 004 peak with a FWHM of 0.004°. AFM measurements reveal a surface roughness of 0.2 nm, similar to that of a polished wafer. Analysis of the chemical composition – as determined through XPS surface and depth-profiled measurements – indicates that the film is homogeneous, with a constant III/V ratio of 1 throughout the whole layer, and has no detectable carbon or oxygen contamination. Additionally, the films demonstrate a sharp photoluminescence peak (FWHM of 55 meV), a p-type doping concentration of 1.1018 cm−3, and a hole mobility of 172 cm2 V⁻1.s⁻1. This work thus demonstrates a cost-effective growth method for III-V devices, enabled by the reduced gas consumption (only a few sccm, compared to tens of L/min in MOCVD) in RP-CVD operation at low pressure.