Photoelectrochemical properties of copper pyrovanadate (CuVO) thin films synthesized by pulsed laser deposition

Polymorphic phases of copper pyrovanadate (α- and β-Cu 2 V 2 O 7 ) were synthesized by solid state reaction and the mechanisms governing the phase transitions have been highlighted by the ThermoGravimetric Analysis (TGA) and the Differential Scanning Calorimetry (DSC). The thermal evolution of the lattice parameters was determined by high temperature X-ray Diffraction revealing negative thermal expansion coefficients. The thermogravimetric analysis coupled with differential scanning calorimetry was also used to determine the optimal conditions to obtain a dense target in order to produce thin films by the Pulsed Laser Deposition (PLD) technique. Thin films elaborated under different oxygen pressures and temperatures exhibit a β-Cu 2 V 2 O 7 polycrystalline phase and their band gap indicates absorption in the visible range. These oxides can be used as photoanodes and their photoelectrochemical properties were studied for both bulk (α-Cu 2 V 2 O 7 ) and thin films (β-Cu 2 V 2 O 7 ), as a function of the wavelength and/or intensity of the luminous flux. The best photocurrent efficiency was obtained under 450 nm illumination. Moreover, in the case of thin films, we have observed a linear evolution of the current density with the luminous flux. Finally, the photostability of thin films was measured and shows a reduction in the photocurrent of 8% after 1 h of measurement. This photocorrosion phenomenon was also highlighted by the elemental mapping performed on thin films by Scanning Electron Microscopy (SEM) coupled with Energy Dispersive X-ray Spectrometry (EDS). The photoelectrochemical properties of copper pyrovanadate (bulk α-Cu 2 V 2 O 7 and thin films β-Cu 2 V 2 O 7 elaborated by pulsed laser deposition) were investigated. For thin films, the best photocurrent efficiency was obtained under blue light (450 nm).