Nonlinear electrochemical and electrokinetic effects in 3omega hot wire measurements of thermophysical properties of nanofluids

This work focuses on the nonlinear electrochemical (EC) activity of fluids and its impact on the accuracy of their thermophysical property measurements using the transient or periodically modulated hot wire method (THW or 3 ω HW). This underestimated source of errors becomes crucial for nanofluids,...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of thermal analysis and calorimetry 2019-05, Vol.136 (4), p.1457-1465
Hauptverfasser: Chirtoc, M., Henry, J.-F., Horny, N.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This work focuses on the nonlinear electrochemical (EC) activity of fluids and its impact on the accuracy of their thermophysical property measurements using the transient or periodically modulated hot wire method (THW or 3 ω HW). This underestimated source of errors becomes crucial for nanofluids, where the thermal conductivity enhancement coefficient ( k / k 0  − 1) is small, requiring high-resolution measurements (below 1%). Theoretical predictions combining thermal and EC nonlinearities are confronted to experimental results obtained with two variants of 3 ω cells. Water-based nanofluids (TiO 2 and Al 2 O 3 ) and water solutions of acetic acid, sodium hydroxide and sodium chloride were tested. The two classes of samples show different 3 ω amplitude and phase behaviors, which is attributed to additional electrokinetic effects in nanofluids. For all studied samples an anti-correlation between the magnitude of the harmonics and the dc electrical resistivity of the samples was observed. A simple estimation method of 3 ω HW errors is proposed consisting in measuring the 2nd harmonic in addition to the 3rd one. The combination of 2nd and 3rd harmonics allowed determining the nonlinearity coefficient which quantitatively characterizes the EC activity of samples. Eventually, the radical solution to avoid the discussed sources of errors is to use an electrically insulated hot wire sensor.
ISSN:1388-6150
1588-2926
DOI:10.1007/s10973-018-7807-5