Pyrolysis of ficus nitida wood: Determination of kinetic and thermodynamic parameters

[Display omitted] •Kinetic and thermodynamic parameters of ficus nitida wood were studied by TGA.•Friedman, Flynn-Wall-Ozawa and Vyazovkin methods were used to provide kinetic parameters.•Master-plots integral method proved D4, D2, and F3 of pyrolysis of hemicellulose, cellulose and lignin, respectively.•Thermodynamic parameters (ΔH, ΔG and ΔS) of Ficus wood were elucidated using kinetic data at three temperature regions.•Little difference in energy (≈5 kJ.mol−1) between E and ΔH requires only a low potential energy. In the present work, the kinetic and thermodynamic analysis of ficus wood was carried out using the thermogravimetric analysis (TGA). Thermal degradation of ficus wood has been evaluated under dynamic conditions from 373 K to 1173 K at heating rates of 5, 10, 20, and 50 K.min−1. The kinetic analysis was performed using isoconversional methods (Friedman (FR), Flynn-Wall-Ozawa (FWO) and Vyazovkin (VYA)) and the integral master-plots method to estimate the kinetic triplets. The thermogravimetric and kinetic data were used to calculate the thermodynamic parameters (ΔG, ΔH and ΔS) and kinetic compensation effects. The conversion range of 0.05 ≤ x ≤ 0.9 shows clearly that the pyrolysis of ficus wood could represent a triple-step reaction, which corresponds to the pyrolysis of hemicellulose, cellulose, and lignin, respectively. From the isoconversional plots of ficus wood having average activation energy values of 171.4–180.3 kJ.mol−1, 206.48–214.42 kJ.mol−1 and 237.85–248.23 kJ.mol−1 for hemicellulose, hemicellulose, and lignin, respectively. The experimental data of focus wood had overlapped the D4, D2, and F3 in the conversion range of 5–35%, 35–75%, and 75–90%, respectively. All values of ΔH and ΔG maintain at a positive constant, whereas the value of ΔS is negative in the range of 5–35%. The difference between E-values and the ΔH value for the three pseudo-components of ficus wood is about ≈5 kJ.mol−1. The kinetic and thermodynamic parameters will be beneficial in assimilating the thermal decomposition of ficus wood for its use in bioenergy.