Impact of soil salinity, texture and measurement frequency on the relations between soil moisture and 20 MHz–3 GHz dielectric permittivity spectrum for soils of medium texture

•Soil moisture measurement can be significantly affected by salinity and texture.•Even relatively small variations in texture may have an impact.•Low-frequency capacitance/impedance sensors may be especially affected.•The impact of salinity and texture is minimized above several hundred MHz.•Soil-sp...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of hydrology (Amsterdam) 2019-12, Vol.579, p.124155, Article 124155
Hauptverfasser: Szypłowska, Agnieszka, Lewandowski, Arkadiusz, Jones, Scott B., Sabouroux, Pierre, Szerement, Justyna, Kafarski, Marcin, Wilczek, Andrzej, Skierucha, Wojciech
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:•Soil moisture measurement can be significantly affected by salinity and texture.•Even relatively small variations in texture may have an impact.•Low-frequency capacitance/impedance sensors may be especially affected.•The impact of salinity and texture is minimized above several hundred MHz.•Soil-specific calibration is recommended to improve soil moisture measurement. Dielectric sensors are a popular choice for soil moisture determination. However, the output of many of these devices, especially those operating at frequencies in the MHz range, can be significantly affected by the influence of soil salinity and texture. The aim of this paper is to examine the impact of salinity, texture and measurement frequency on dielectric permittivity – soil moisture calibration curves for ten soils of medium texture in the frequency range from 20 MHz to 3 GHz based on the complex dielectric permittivity spectra measured with the use of a coaxial transmission line cell connected to a vector-network-analyzer. The use of laboratory-measured spectra ensures that at all frequencies dielectric permittivity is measured at the same conditions with no influence of factors such as different sensitivity zone or various installation conditions, as in the case of comparing individual sensors operating at various frequencies. The obtained relations were comparable to the calibration curves of several capacitance/impedance sensors operating at corresponding frequencies. Calibration curves for apparent permittivity, which were obtained with the use of simulations in the time domain based on the measured spectra, were also determined for the tested soils. Even though the tested soils did not include soils with high clay content, the impact of soil texture on the calibration curves was observed. Results confirmed that the influence of soil salinity and texture on dielectric permittivity was the most significant in the lower part of the frequency spectrum, while the smallest impact of these factors was observed at frequencies of several hundred MHz and above.
ISSN:0022-1694
1879-2707
DOI:10.1016/j.jhydrol.2019.124155