Electrochemical performances of hydrothermal tannin-based carbons doped with nitrogen

[Display omitted] •Nitrogen-doped (up to 8.0wt.%) carbon materials were prepared from tannin.•Electrochemical performances at 2mVs−1 are outstanding.•There is a beneficial role of oxygen content up to 18wt.%.•An optimum in nitrogen content exists from 3 to 6wt.%.•Improvement is still needed to increase mesopore volume within the range 3–13nm. Six porous carbon materials, produced by hydrothermal treatment of flavonoid tannin and subsequent carbonization at 1173K, were tested as electrodes of supercapacitors. Four of these carbons were doped with nitrogen by putting tannin in contact with ammonia before or during the hydrothermal treatment. The pyrolyzed hydrothermal carbons had moderate surface areas, within the range 442–684m2g−1, and nitrogen contents ranging from 0.7 to 8.0wt.%. Specific capacitances as high as 320Fg−1 and normalized capacitances as high as 58μFcm−2 were measured at 2mVs−1. These performances are comparable with those obtained with high surface area-activated carbons, whereas, normalized capacitances values are among the highest ever reported. Mesostructuration, within the range 3–13nm, of these materials appears to be a good strategy to improve their electrochemical performances at higher scan rates. We confirmed the beneficial role of oxygen up to 18wt.%, while an optimum in nitrogen content exists from 3 to 6wt.%.