Design and Evaluation of a Shear Analogy Tool for Custom Cross-Laminated Timber (CLT) Panels Made from Various Wood Species

A user-friendly cross-laminated timber (CLT) design tool called SAM-CLT was developed to calculate the minimum design values for custom CLT panels. Custom panels are those made from different species not currently included in APA PRG 320 and include the use of multiple species in a panel. The tool uses the design value of hardwood and softwood lumber published in the national design specification book to design custom CLTs and the standard CLT grade lumber specification values published in PRG 320 standard. SAM-CLT was designed based on the shear analogy model and is intended to assist CLT manufacturers, construction and design companies, and researchers in designing and evaluating CLTs’ deformation when using different lumber types and thicknesses. This project included the calibration and validation of the tool, followed by examples of its use by computing the design value of the softwood, hardwood, and softwood–hardwood hybrid CLTs. The SAM-CLT tool was adjusted to match the published standard design values on PRG 320 and validated by comparing output for standard CLT layups. In the next step, SAM-CLT tool was used to calculate the minimum design value of custom CLTs made from hardwood–yellow poplar lumber and softwood–southern yellow pine lumber. Based on observed validation results of the tool and its application results to determine the design values for various CLT layups, this project concludes that SAM-CLT can be a valuable tool for designing custom CLTs, evaluating CLTs’ strength properties, and promoting heterogeneous lumber types in CLT manufacturing.