Reduced graphene oxide in the construction of solid-state bromide-selective electrode
To improve the electrochemical performance of solid-state printed electrodes, reduced graphene oxide is used as an intermediate layer (mediator) between the surface layer of a current collector and the ionophore layer. A graphene oxide film was deposited onto the surface of printed electrodes by dro...
Gespeichert in:
Veröffentlicht in: | Journal of analytical chemistry (New York, N.Y.) N.Y.), 2015-03, Vol.70 (3), p.378-383 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | To improve the electrochemical performance of solid-state printed electrodes, reduced graphene oxide is used as an intermediate layer (mediator) between the surface layer of a current collector and the ionophore layer. A graphene oxide film was deposited onto the surface of printed electrodes by drop-casting, followed by reduction and electrochemical deposition. An ionic liquid 1,3-dihexadecylimidazolium bromide served as ionophore. The effect of reduced graphene oxide on the characteristics of the ion-selective electrode is studied, and it is shown that the sensors electrochemically modified with reduced graphene oxide have the best performance. These sensors exhibit a stable, well-reproducible response to bromide ions with the slope of the electrode function close to the Nernstian value (−60.7 ± 0.7 mV/dec) and a low detection limit of 3.6 × 10
−6
M. The response time for all of the electrodes does not exceed 15 s even in dilute solutions. |
---|---|
ISSN: | 1061-9348 1608-3199 |
DOI: | 10.1134/S1061934815030193 |