Lightweight Materials based on Fused Chamotte

Lightweight Materials based on Fused Chamotte

The results of studies on obtaining refractory lightweight materials using as a filler chamotte obtained by using a concentrated radiant flux to fuse a mixture of kaolinite clay and alumina-containing production wastes are presented. The phase composition, microstructure, and physicomechanical chara...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Glass and ceramics 2021, Vol.77 (9-10), p.344-347
Hauptverfasser: Rumi, M. Kh, Irmatova, Sh. K., Faiziev, Sh. A., Zufarov, M. A., Mansurova, É. P., Urazaeva, É. M., Arushanov, G. M.
Format: Artikel
Sprache:eng
Schlagworte:
Aluminum oxide
Ceramics
Characterization and Evaluation of Materials
Chemistry and Materials Science
Composites
Glass
Materials Science
Natural Materials
Powders
Refractories industry
Sintering
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The results of studies on obtaining refractory lightweight materials using as a filler chamotte obtained by using a concentrated radiant flux to fuse a mixture of kaolinite clay and alumina-containing production wastes are presented. The phase composition, microstructure, and physicomechanical characteristics of sintered samples were determined. It was found that the samples based on fused chamotte with 10 – 20% (by weight) aluminum-containing additive possess the optimal combination of properties (apparent density 1.14 – 1.3 g/cm 3 ) and strength in compression (8.6 – 17.1 MPa), which is due to a favorable combination of the phase composition and microstructure.
ISSN:0361-7610
1573-8515
DOI:10.1007/s10717-021-00304-0