Målskjutningsgevär, slaglås, Horrmann, München, 1800-talets mitt

Eight-sided, serrated barrel of steel, 7 ribs, bowled booms. On the top of the pipe, false damasket in the form of punched zigzag lines and transverse bands with eight-legged flowers, five bands with a flower on each phase, between the flower bands burst into another decoration, every two with six rhombodied flowers, scraped background, every two with three eight-legged flowers. At pip base and mouth transverse silver bands. On the chamber, a decor of silver, cartuscher and ribbon braiding, on the top side signature inserted in silver: “HORRMANN IN MÜNCHEN,” the silver decor and signature against a dotted background. Long tail screw blade with rank decor against a smooth background. On the h. “side”means an angular snack with a shiny lighter hat snail, screwed into the snail through a plate with a curved arm with a vulcanised closure. On the back of the snail a tall, c-shaped screen with vulcanised ends, between the snail and the barrel a high screen with a contoured top, the rear edge turned after the second screen, engraved leaf decor along the top edge. Means of direction: Inlaxated means of direction, a soaked position with long, forward-looking, pierced arm, sight-adjustable in height with screw in front of the sight screen. Small post grain of silver on a rectangular, arched, shiny plate with a backward, contoured and broken arm. On the tail screw blade a square hole for diopter. Attachment: Pipan fastened with screw screw and wooden screw at the rear of the tail screw blade, the rear locking screw through the tail screw plate and three blunted, English steel pipe pins. Stroke locks of grey striped steel, flat lockplate with engraved rank decor at both ends, transient on the one hand in a male figure with bend and lift hat, and on the other hand in clown with a painting board and a ground rod. Internal, shiny male placed on the front end of the locking pin, directed to the rear, harcoin impact head with net-cut thumb grip, Hankroppen c-shaped, in the bottom full and half span hook, in the top the stroke spring is attached by link. Pressure bar along the entire lock board. Attachment: A locking screw. Imprint with a snapshot, brass trigger Hedging with a push button on the front log v. side by the hand position, the push button affects a lever that, in the bottom of the barrel, goes to the trigger. In order for a shot to be detached, the button must be kept in touch, with a plate at the rear end of the leverage inserted between the trigger and the tri