Non-parallel splined hub and shaft connection

A connection between a shaft and a coupling that preferably involves involute shaped splines is designed to reduce stress from torque applied to the shaft by a drive motor. To avoid stress concentration at the mouth of the coupling on startup, the shaft splines are made to taper from the shaft end down to the spline end. As a result, the initial contact with the coupling splines occurs within the coupling and removed from it mouth. The shaft is allowed to elastically twist in response to the applied torque as the contact area increases with shaft twisting and the contact line moves toward the mouth of the coupling. Some shaft elastic twist occurs without adding stress to the shaft splines until coupling contact is made.