Ball check air vent for transmission pump

A pressure-relieving valve is connected to relieve air pressure from an internal diameter of a transmission pump. On startup, pressurized oil is delivered to the torque converter. At engine idle speed, the centrifugal effects on the oil cause any air (which may have leaked into the torque converter during the shut-down time) to accumulate at the center of the converter. Air pressure output from a torque converter escapes between the housing and the transmission pump to which it is connected. The escaped air reaches the internal diameter of the pump and it is prevented from blowing across the face of the pump to the suction side of the pump by a ball and check valve arrangement which delivers the air to a non-fluid internal part of a transmission, thereby avoiding the leakage of this air to the suction side of the pump and the possible loss of pump prime.