Coarse calibration circuit using variable step sizes to reduce jitter and a dynamic course calibration (DCC) circuit for a 2 GHz VCO

A calibration system for a Phase Locked Loop (PLL) includes a phase/frequency detector coupled to the output of a voltage controlled oscillator (VCO) and to a source of a reference frequency. A charge pump is connected to receive an error signal from the phase/frequency detector and provide a voltage to a low pass filter. The low pass filter provides a filtered error signal to the VCO and to a comparator system. The comparator system provides a comparator output signal indicating when the polarity of the error signal exceeds a positive limit or a negative limit. A calibration means continuously provides incremental calibration inputs to the VCO, after a time delay. Thus the frequency of the VCO in the PLL is continuously corrected to compensate for frequency drift, and avoid jitter caused by an excessive rate of response to calibration inputs.