Process for making a mask used in x-ray photolithography

A method of manufacturing a mask for use in x-ray photolithography includes the steps of coating a set of wafers (20) with boron nitride (22). The tension in the boron nitride is measured by using a capacitive probe (26) to measure bowing in a set of test wafers. The remaining wafers are attached to a pyrex ring (28), and the boron nitride is removed from one side of the wafers. A circular hole is then eteched in the wafer, and a layer of tantalum (32) and gold (34) are formed on the remaining boron nitride membrane. The gold (34) is patterned via a sputter etching process. Power is reduced at the end of the sputter etching process slowly to reduce mechanical stress in the mask. The tantalum (32) is then etched via a reactive ion etching process. In this way, an x-ray transparent boron nitride membrane is used to support x-ray opaque gold.