Coated steel sheet and high strength press hardened steel part and method of manufacturing the same

A coated steel sheet and press hardened steel part having a composition including, by weight percent: C 0.15-0.25%, Mn 0.5-1.8%, Si 0.1-1.25%, Al 0.01-0.1%, Cr 0.1-1.0%, Ti 0.01-0.1%, B 0.001-0.004%, P≤0.020%, S≤0.010%, N≤0.010% the remainder of the composition being iron and unavoidable impurities...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	DUMONT, Alice, PHILIPPOT, Clément, BEAUVAIS, Martin, HERRY, Deborah
Format:	Patent
Sprache:	eng
Schlagworte:	ALLOYS AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL CHEMICAL SURFACE TREATMENT CHEMISTRY CLEANING OR DEGREASING OF METALLIC MATERIAL BY CHEMICALMETHODS OTHER THAN ELECTROLYSIS COATING BY VACUUM EVAPORATION, BY SPUTTERING, BY ION IMPLANTATIONOR BY CHEMICAL VAPOUR DEPOSITION, IN GENERAL COATING BY VACUUM EVAPORATION, BY SPUTTERING, BY IONIMPLANTATION OR BY CHEMICAL VAPOUR DEPOSITION, IN GENERAL COATING MATERIAL WITH METALLIC MATERIAL COATING METALLIC MATERIAL DIFFUSION TREATMENT OF METALLIC MATERIAL FERROUS OR NON-FERROUS ALLOYS GENERAL DEVICES FOR HEAT TREATMENT OF FERROUS OR NON-FERROUSMETALS OR ALLOYS INHIBITING CORROSION OF METALLIC MATERIAL OR INCRUSTATION INGENERAL MAKING METAL MALLEABLE BY DECARBURISATION, TEMPERING OR OTHERTREATMENTS MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL METALLURGY METALLURGY OF IRON MODIFYING THE PHYSICAL STRUCTURE OF FERROUS METALS PERFORMING OPERATIONS PUNCHING METAL SURFACE TREATMENT OF METALLIC MATERIAL BY DIFFUSION INTO THESURFACE, BY CHEMICAL CONVERSION OR SUBSTITUTION TRANSPORTING TREATMENT OF ALLOYS OR NON-FERROUS METALS
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	A coated steel sheet and press hardened steel part having a composition including, by weight percent: C 0.15-0.25%, Mn 0.5-1.8%, Si 0.1-1.25%, Al 0.01-0.1%, Cr 0.1-1.0%, Ti 0.01-0.1%, B 0.001-0.004%, P≤0.020%, S≤0.010%, N≤0.010% the remainder of the composition being iron and unavoidable impurities resulting from the smelting. The press hardened steel part includes a bulk having a microstructure including, in surface fraction, more than 95% of martensite and less than 5% of bainite, a coating layer at the surface of the steel part, a ferritic interdiffusion layer between the coating layer and the bulk, and a ratio between the ferritic grain width in the interdiffusion layer GWint over prior austenite grain size in the bulk PAGSbulk, satisfying following equation (GWint/PAGSbulk)−1≥30%.