Flat Steel and Method for Producing Same

A flat steel product consisting of (in wt %) 0.1-0.5% C, 1.0-3.0% Mn, 0.9-1.5% Si, ≤1.5% Al, ≤0.008% N, ≤0.020% P, ≤0.005% S, 0.01-1% Cr and optionally one or more of: ≤0.2% Mo, ≤0.01% B, ≤0.5% Cu, ≤0.5% Ni and optionally a total of 0.005-0.2% microalloying elements, the remainder iron and unavoidab...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Rudolph, Jan-Hendrik, Thiessen, Richard G, Irnich, Manuela, Linke, Bernd, Fechte-Heinen, Rainer, Lange, Miriam
Format:	Patent
Sprache:	eng
Schlagworte:	ALLOYS CHEMICAL SURFACE TREATMENT CHEMISTRY CLEANING OR DEGREASING OF METALLIC MATERIAL BY CHEMICALMETHODS OTHER THAN ELECTROLYSIS COATING BY VACUUM EVAPORATION, BY SPUTTERING, BY ION IMPLANTATIONOR BY CHEMICAL VAPOUR DEPOSITION, IN GENERAL COATING MATERIAL WITH METALLIC MATERIAL COATING METALLIC MATERIAL DIFFUSION TREATMENT OF METALLIC MATERIAL FERROUS OR NON-FERROUS ALLOYS GENERAL DEVICES FOR HEAT TREATMENT OF FERROUS OR NON-FERROUSMETALS OR ALLOYS INHIBITING CORROSION OF METALLIC MATERIAL OR INCRUSTATION INGENERAL MAKING METAL MALLEABLE BY DECARBURISATION, TEMPERING OR OTHERTREATMENTS METALLURGY METALLURGY OF IRON MODIFYING THE PHYSICAL STRUCTURE OF FERROUS METALS TREATMENT OF ALLOYS OR NON-FERROUS METALS
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	A flat steel product consisting of (in wt %) 0.1-0.5% C, 1.0-3.0% Mn, 0.9-1.5% Si, ≤1.5% Al, ≤0.008% N, ≤0.020% P, ≤0.005% S, 0.01-1% Cr and optionally one or more of: ≤0.2% Mo, ≤0.01% B, ≤0.5% Cu, ≤0.5% Ni and optionally a total of 0.005-0.2% microalloying elements, the remainder iron and unavoidable impurities. The steel has a structure consisting of ≥80 area % martensite, where ≥75 area % is tempered and ≤25 area % is non-tempered, ≥5 volume % residual austenite, 0.5-10 area % ferrite, ≤5 area % bainite, and carbides with a length of ≤250 nm, wherein in the phase boundary between tempered martensite and residual austenite, there is a low-Mn ferrite seam having a width of 4·12 nm and a Mn content of ≤50% of the average Mn content. Also, a method for producing the flat steel in which the structural characteristics of the flat steel product are set by suitable heat treatment.