PV WIND PERFORMANCE ENHANCING METHODS

Pressure equalization between upper and lower surfaces of PV modules of an array of PV modules can be enhanced in several ways. Air gaps opening into the air volume, defined between the PV modules and the support surface, should be provided between adjacent PV modules and along the periphery of the...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Dinwoodie Thomas L, O'Brien Colleen A, Neff David E, Mascolo Gianluigi
Format:	Patent
Sprache:	eng
Schlagworte:	BASIC ELECTRIC ELEMENTS BLASTING CONVERSION OR DISTRIBUTION OF ELECTRIC POWER ELECTRIC SOLID STATE DEVICES NOT OTHERWISE PROVIDED FOR ELECTRICITY GENERATION GENERATION OF ELECTRIC POWER BY CONVERSION OF INFRA-REDRADIATION, VISIBLE LIGHT OR ULTRAVIOLET LIGHT, E.G. USINGPHOTOVOLTAIC [PV] MODULES HEATING LIGHTING MECHANICAL ENGINEERING RANGES SEMICONDUCTOR DEVICES VENTILATING WEAPONS
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	Pressure equalization between upper and lower surfaces of PV modules of an array of PV modules can be enhanced in several ways. Air gaps opening into the air volume, defined between the PV modules and the support surface, should be provided between adjacent PV modules and along the periphery of the array. The ratio of this air volume to the total area of the air gaps should be minimized. Peripheral wind deflectors should be used to minimize aerodynamic drag forces on the PV modules. The time to equalize pressure between the upper and lower surfaces of the PV modules should be maintained below, for example, 10-20 milliseconds. The displacement created by wind gusts should be limited to, for example, 2-5 millimeters or less. For inclined PV modules, rear air deflectors are advised for each PV module and side air deflectors are advised for the periphery of the array.