Supermalloy and MU Metal Side and Top Shields for Magnetic Read Heads

The use of supermalloy-like materials such as NiFeMe where Me is one or more of Mo, Cr, and Cu for the side and top shields of a magnetic bit sensor is shown to provide better shielding protection from stray fields because of their extremely high permeability. Moreover, the side shield may comprise...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Li Min, Chye Yewhee, Zhang Kunliang
Format:	Patent
Sprache:	eng
Schlagworte:	GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS INFORMATION STORAGE INFORMATION STORAGE BASED ON RELATIVE MOVEMENT BETWEEN RECORDCARRIER AND TRANSDUCER PHYSICS TECHNICAL SUBJECTS COVERED BY FORMER US CLASSIFICATION TECHNICAL SUBJECTS COVERED BY FORMER USPC TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	The use of supermalloy-like materials such as NiFeMe where Me is one or more of Mo, Cr, and Cu for the side and top shields of a magnetic bit sensor is shown to provide better shielding protection from stray fields because of their extremely high permeability. Moreover, the side shield may comprise a stack in which a Ni, Fe, Co, FeNi, CoFe, or FeCo is sandwiched between two NiFeMe layers to enhance the bias field on an adjacent free layer. Including NiFeMe in a side shield results in an increase in readback amplitude under the same asymmetric sigma. For these sensors, the signal to noise ratio was higher and the bit error rate was lower than with conventional materials in the side shield.