STEEL WRAPPED PRESSURE VESSEL

A light weight pressure vessel (10) has been proposed. The vessel (10) is made of a steel, aluminum or non-metal liner (11) which is reinforced with high strength steel wires (21) of 2000-7000 MPa strength. The matrix is filled with a polymer epoxy resin (45). A top layer of fabric tape (33) soaked...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	HEAD WILLIAM JAMES, SHARP GEORGE RICHARD, DEEKEN BRIAN TOWNSEND, PRAKASH AMIT, THOMSON WILLIAM H
Format:	Patent
Sprache:	eng
Schlagworte:	ACCESSORIES, CLOSURES, OR FITTINGS THEREFOR AUXILIARY OPERATIONS USED IN CONNECTION WITH METAL-WORKINGWITHOUT ESSENTIALLY REMOVING MATERIAL CONTAINERS FOR STORAGE OR TRANSPORT OF ARTICLES OR MATERIALS,e.g. BAGS, BARRELS, BOTTLES, BOXES, CANS, CARTONS, CRATES,DRUMS, JARS, TANKS, HOPPERS, FORWARDING CONTAINERS CONVEYING HANDLING THIN OR FILAMENTARY MATERIAL MANUFACTURE OF METAL SHEETS, WIRE, RODS, TUBES OR PROFILES,OTHERWISE THAN BY ROLLING MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVINGMATERIAL PACKAGES PACKAGING ELEMENTS PACKING PERFORMING OPERATIONS PUNCHING METAL STORING TRANSPORTING
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	A light weight pressure vessel (10) has been proposed. The vessel (10) is made of a steel, aluminum or non-metal liner (11) which is reinforced with high strength steel wires (21) of 2000-7000 MPa strength. The matrix is filled with a polymer epoxy resin (45). A top layer of fabric tape (33) soaked in resin (45) has been used to embed the finish end (24) of the wire (21) and to provide a protective layer over the wire reinforced area. The mesh or net fabric wrap tape (33) has periodic openings to allow penetration of polymer epoxy resin (45). A top coat of a UV resistant polyurethane paint (47) has been applied.