Thermal compensation without creep in a hydrodynamic bearing

A hydrodynamic bearing is provided comprising a shaft having a pair of spaced apart conical bearings supporting a surrounding sleeve for rotations. The sleeve comprises a single piece rather than the two-piece design separated by a rubber expansion joint of the prior art. Instead upper and lower slots are cut into the sleeve, and the rings are pressed or otherwise tightly fitted into each slot. The single piece sleeve which also incorporates the bearing seats for the conical bearings on the shaft, is made of aluminum, while each ring is made of steel (as is the shaft and bearing cones). As the temperature rises at which the hydrodynamic bearing is operated, the sleeve expands axially putting the bearing seat closer to the cone, effectively compensating for the thinning of the fluid which supports the bearing seat and sleeve for rotation relative to the cone. Meanwhile, the steel ring, being of the same material as the shaft, prevents the aluminum sleeve from expanding radially away from the cone. Further, the axial length of the interface between the sleeve and ring can be adjusted to control the amount of thermal compensation into any system, allowing for very accurate control of the thermal compensations scheme.