Aluminum alloy for heat exchanger fins
An aluminum alloy fin stock material comprising about 0.9-1.2 wt. % Si, 0.3-0.5 wt. % Fe, 0.20-0.40 wt. % Cu, 1.0-1.5 wt. % Mn, 0-0.1% Mg and 0.0-3.0% Zn, with remainder Al and impurities at ≤0.15 wt. %. The aluminum alloy fin stock material is produced in a form of a sheet by a process comprising t...
Gespeichert in:
Hauptverfasser: | , , , , , |
---|---|
Format: | Patent |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext bestellen |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | An aluminum alloy fin stock material comprising about 0.9-1.2 wt. % Si, 0.3-0.5 wt. % Fe, 0.20-0.40 wt. % Cu, 1.0-1.5 wt. % Mn, 0-0.1% Mg and 0.0-3.0% Zn, with remainder Al and impurities at ≤0.15 wt. %. The aluminum alloy fin stock material is produced in a form of a sheet by a process comprising the steps of direct chill casting an ingot, hot rolling the ingot after the direct chill casting, cold rolling the aluminum alloy to an intermediate thickness, inter-annealing the aluminum alloy cold rolled to an intermediate thickness at a temperature between 200 and 400° C., and cold rolling the material after inter-annealing to achieve % cold work (% CW) of 20 to 40%. The aluminum alloy fin stock material possesses an improved combination of one or more of pre- and/or post-brazes strength, conductivity, sag resistance and corrosion potential. It is useful for fabrication of heat exchanger fins. |
---|