Device for deicing a splitter nose and inlet guide vanes of an aviation turbine engine

A deicer device deices both a splitter nose and inlet guide vanes of an aviation turbine engine. The device includes a splitter nose to split a stream coming from the fan into primary and secondary stream flow channels of annular shape and an inner shroud to which inlet guide vanes are fastened and...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Brunet, Antoine Robert Alain, Amoedo, Simon Jose Pierre, Scholtes, Christophe
Format:	Patent
Sprache:	eng
Schlagworte:	AIR INTAKES FOR JET-PROPULSION PLANTS AIRCRAFT ARRANGEMENTS OR MOUNTING OF POWER PLANTS OR PROPULSIONTRANSMISSIONS IN AIRCRAFT AVIATION BLASTING COMBUSTION ENGINES CONTROLLING FUEL SUPPLY IN AIR-BREATHING JET-PROPULSION PLANTS COSMONAUTICS ENGINE PLANTS IN GENERAL EQUIPMENT FOR FITTING IN OR TO AIRCRAFT FLYING SUITS GAS-TURBINE PLANTS HEATING HOT-GAS OR COMBUSTION-PRODUCT ENGINE PLANTS JET-PROPULSION PLANTS LIGHTING MACHINES OR ENGINES IN GENERAL MECHANICAL ENGINEERING NON-POSITIVE DISPLACEMENT MACHINES OR ENGINES, e.g. STEAMTURBINES PARACHUTES PERFORMING OPERATIONS STEAM ENGINES TRANSPORTING WEAPONS
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	A deicer device deices both a splitter nose and inlet guide vanes of an aviation turbine engine. The device includes a splitter nose to split a stream coming from the fan into primary and secondary stream flow channels of annular shape and an inner shroud to which inlet guide vanes are fastened and including a hook that holds the inner shroud axially at its upstream end against the inner annular wall. An outer surface facing of the hook forms an angle of less than 90° with an injection orifice such that the outer surface comes progressively closer to the outer annular wall on going away from the injection orifice. The outer surface of the hook presents a minimum amount of clearance J relative to the outer annular wall such that 0.2≤J/D≤0.6 where D is the hydraulic diameter of an injection orifice.