METHOD FOR ELECTROMAGNETIC THERAPY AND DEVICE FOR ITS REALIZATION

The method for the electromagnetic therapy comprises the combination of high coherent amplitude-modulated low-intensity (0.1à10 mW/cm2) electromagnetic radiation in millimeter range, muiltivector constant magnetic field, alternating magnetic field, mechanostimulation, and alternating electric field, three latter factors are generated due to radioacoustic effect. The device for the electromagnetic therapy comprises the semiconductor diode, preferentially Gunn-effect diode, installed between the wide walls of the segment of rectangular waveguide of the nominal cross-section. The waveguide is connected to the power supply via the low-pass filter located in the wide wall of the segment of rectangular waveguide. One end of the waveguide is connected to the short-circuiting switch, the opposite output end faces the biological object under exposure. The device also contains the short-circuiting segment of the coaxial line aligned with the longitudinal axis of the segment of rectangular waveguide connected to the segment of the coaxial line through the slit-type clearance. Other components of the device are such as follows: the electric-controlled attenuator, wave converter with one of its ends connected to the second end of the electric-controlled attenuator, the constant ring magnet embracing the output of the deviator of wave polarization. The walls of the waveguide contain the gap in the plane of the cross-section between the semiconductor diode and the short-circuiting switch. The gap comprises the ferrite insert.