BOZHOK û GERASKINÆS SIMULATOR OF MOTION OF MACHINERY

The utility model relates to engineering masking means. A simulator of motion of machinery has foldable box with frame, electric drive with outlet vertical shaft placed inside the box on the frame, cross element fixed at the upper part of the shaft, with beams installed on it symmetrically with angle reflectors at the periphery. To provide handiness and to increase effectiveness the drive is arranged pneumatic, as accumulator of compressed air with pressure indicator. The vertical shaft is made hollow, its lower part is rigidly connected to the accumulator of compressed air and through support bearing û to the frame of the box, with possibility of rotation with respect to the axis. At the upper part of the shaft on the cross element executive mechanism of remote control is installed, with automated valve and the tap of manual adjustment of the output air pressure, and the beams are made hollow, with those at one side the shaft cavity if connected, and at the other sire near reflectors controlling taps and nozzles are installed. Pneumatic controller is installed, with body fixed at the middle part of the shaft, cover and diaphragm. Additionally silphon is installed, this is connected with tightening with one end to the body, and with the other end û to the rod, it forms with the body and diaphragm chamber connected through throttle to atmosphere, there beaten the base of the diaphragm and the body spring is placed, with the unit for change of the level of its tightening. On the shaft compensation chamber is installed.