FORFARANDE OCH ANORDNING FOR ATT SEPARERA PARTIKELFORMIGT MATERIAL FRAN GASER

A receptacle for separating particle type material from gases which are to be cleaned involves a housing (40) with a gas inlet channel (34) on the upper section, and a gas outlet channel (36) at the bottom. Two partition walls (10, 12) in the housing form an upper gas inlet chamber (42) into and in direct contact with the gas inlet channel (34), a lower feed outlet chamber (46), for clean gas, into and in direct contact with the gas outlet channel (36), and a separation chamber situated between the walls (44). Several centrifugal-separators (2) run vertically through the walls (10, 12) and through the separation chamber (44) plates. Each separator (2) has an inner (4) and an outer (6) pipe between which a ring shaped channel (8) is formed. The inner pipe (4) is closed at the upper end and open at the bottom. The channel (8) is open at the upper end and closed at the bottom, and the inner pipe has several vents (26) running in a longitudinal direction which connect the lower part of the channel (8) and the inner pipe's (4) inner opening at the upper end of the channels (8) in the separators (2), standing in direct connection with the inlet chamber (42), and several turning shovels (15) are deployed at the opening. The open bottom sections of the inner pipe (4) stand in direct connection with the clean gas chamber (46) and a tube (50) stand in direct connection with the bottom of the separation chamber (44) in order to bring away the spill gas and the separated particles.