PRESS FOR THERMOFORMING OF PRODUCT

FIELD: equipment for production of non-standard products at enterprises of chemical, instrument engineering, automobile industry, small enterprises inclusive. ^ SUBSTANCE: the press includes columns installed on a supporting foundation, fastened in the upper part by a cross-piece, attached to which is the upper fixed heating stove. The press has a lower movable heating stove coupled to the rod of a hydraulic cylinder, lifting table fixed to the lower movable heating stove, and a control and monitoring equipment. The cross-piece and the lower part of the movable heating stove, and a control and monitoring equipment. The cross-piece and the lower part of the movable stove are made each at least of a set of two heat-insulating plate has blind recesses in which material with higher heat-insulating properties is placed. The combination of projections of blind recesses onto the horizontal surface of the lower and upper heating stoves, respectively, completely covers it. The press is provided with a system of compensation of heat loss around the edges of the body. The joints of the rod of the hydraulic cylinder and the lower heating stove and, respectively, of the cross-piece and the upper heating stove are heat insulated. ^ EFFECT: provided strength and rigidity of the cross-piece and the lower part of the movable stove, reduced heat exchange between the heating stoves, cross-piece, control and monitoring equipment and the hydraulic cylinder, enhanced efficiency of operation of the heating stoves. ^ 4 cl, 10 dwg