PRODUCTION METHOD OF A TECHNICAL POLYESTER MULTI-FILAMENTARY YARN WITH INCREASED ADHERENCE TO RUBBER

The process consists of drawing through six rolls, of 200-filament 6400-6600 dtex 42 tors/m spun thread, fixing at 85-100 degrees C, treatment with 8% glycidyl ether, controlled drawing, treatment with resorcin-formaldehyde-latex soln., heat treatment at 220 degrees C for 150-18 sec., and impregnati...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	ZLATE VICTORIA, ALEXANDRONIU CARMEN, STAN CORNELIU, ROSU VIOREL, GOLOVCENCU MARIA, ANTON MARIANA, BUSUIOC LUCIAN, CLINCU GHEORGHE
Format:	Patent
Sprache:	eng
Schlagworte:	APPARATUS SPECIALLY ADAPTED FOR THE MANUFACTURE OF CARBONFILAMENTS CHEMICAL FEATURES IN THE MANUFACTURE OF ARTIFICIAL FILAMENTS,THREADS, FIBRES, BRISTLES OR RIBBONS CRIMPING OR CURLING FIBRES, FILAMENTS, THREADS, ORYARNS MECHANICAL FINISHING OF YARNS OR ROPES NATURAL OR ARTIFICIAL THREADS OR FIBRES SPINNING TEXTILES WARPING OR BEAMING YARNS YARNS OR THREADS
Online-Zugang:	Volltext bestellen
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	The process consists of drawing through six rolls, of 200-filament 6400-6600 dtex 42 tors/m spun thread, fixing at 85-100 degrees C, treatment with 8% glycidyl ether, controlled drawing, treatment with resorcin-formaldehyde-latex soln., heat treatment at 220 degrees C for 150-18 sec., and impregnation with solution based on chlorinated polyethylene-polychloroprene-solvents. Drying at 30-150 degrees C for 10-1 min. and coiling, contributes to an adhesion value of 26-25 kgf/cm.