METHOD OF COMPRESSION MOLDING FOR ELECTRONIC PART AND APPARATUS THEREFOR

METHOD OF COMPRESSION MOLDING FOR ELECTRONIC PART AND APPARATUS THEREFOR

First, a given amount of granular resin (6) is fed into a resin accommodation space (22) of plate (21). Secondly, the plate (21) is covered with a mold release film (11) so as to spread over the resin accommodation space (22). Thirdly, the resin accommodation space (22) is set to a given degree of v...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: TAKASE, SHINJI, ONISHI, YOHEI, NAOKI, TAKADA, ODA, MAMORU, OTSUKI, OSAMU, AMAKAWA, TSUYOSHI, URAGAMI, HIROSHI
Format: Patent
Sprache:eng
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:First, a given amount of granular resin (6) is fed into a resin accommodation space (22) of plate (21). Secondly, the plate (21) is covered with a mold release film (11) so as to spread over the resin accommodation space (22). Thirdly, the resin accommodation space (22) is set to a given degree of vacuum. Fourthly, the plate (21) covered with the mold release film (11) is turned upside down. Finally, the plate turned upside down is moved into a cavity (5), so that the surface of the cavity (5) is covered with the mold release film (11). In this situation, the granular resin (6) is caused to fall from the resin accommodation space (22) into the cavity (5) covered with the mold release film (11).